Rode NT4 Cardoid Condenser Microphone, Silver

69,999 72,000 3% OFF

Item Code: #320

Delivery Time : 5 Days

Availability: In stock

Extended Warranty


The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone.Fixed X/Y stereo 1/2" condenser microphone with 3.5mm minijack and dual XLR connectivity. P48 and 9V battery powered.Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field.

The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera.The RØDE NT4 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.Stereo X/Y condenser microphone

  • Dual externally biased 1/2 inch capsules with gold sputtered diaphragm
  • Capsules closely matched with full frequency response
  • Dual power operation
  • Custom Stereo Cables Included: Dual XLR and mini stereo jack
  • Stereo XY Condenser Microphone
  • 2 X Externally biased 1/2" Capsules with gold sputtered diaphragm
  • Capsules closely matched with full frequency response
  • Durable satin-nickel finish
  • Custom stereo cables included
  • Custom WS4 twin-head Wind Shield
  • Surface-mount transformerless circuitry
  • Complete with Custom Carry Case and RM3 Stand Mount
  • Requires +48V phantom power or battery power

Item Weight 2.04 Kg
Product Dimensions             40.6 x 12.7 x 30.5 cm
Item model number NT4
Colour Silver
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 0.50"
Polar Pattern  Cardioid
Address Type End
Frequency Range 20Hz - 20kHz 
Output Impedance 200Ω
Maximum SPL 143dBSPL 
Maximum Output Level 13.9mV (@ 1kHz, 1% THD into 1KΩ load) 
Sensitivity -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)          16dBA
Power Options  9V Battery+48V phantom power
Weight  480.00g
Dimensions 231.00mmH x 61.00mmW x 33.00mmD
Output  Minijack OutputXLR Output
Warranty  1 year with free extension to 10 years following registration here

Related Products